Installation - Elation TVL3000WW User Instructions

TVL3000WW/TVL3000CW
FHRS
- With this function the display will show the run-
ning time (in hours) of the unit.
1. Press the MENU button until "FHRS" is displayed, press
ENTER.
2. The display shows the life time of the unit. Press MENU to
exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the MENU button until "VER" is displayed, press
ENTER.
2. The display will show the software version.
TVL3000WW/TVL3000CW
When changing the beam angle unscrew the thumb screw
and remove the previous lens kit and replace with the new kit,
now replace the thumb screw.
attached to the unit.
©Elation Professionals® - www.elationlighting.com - TVL3000WW/TVL3000CW Instruction Manual Page 11
System Menu
Changing the Beam Angle
The 10˚ lens is the lens that comes
TVL3000WW/TVL3000C
Universal DMX Control:
universal DMX-512 controller to create unique programs tailored to
your individual needs.
1. The TVL3000WW/TVL3000CW have one DMX channel, see page
13.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 9 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Manual Mode:
This mode allows the user to adjust the dimming so
that you can manually set your desired color temperature.
1. Press the MENU button until
ENTER.
2.
Use the UP and DOWN buttons to adjust the intensity until you
reach your desired intensity.
TVL3000WW/TVL3000CW
The unit should be mounted using a mounting clamp (not provided),
affixing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is firmly fixed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit's weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the fixture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people's grasp.
©Elation Professionals® - www.elationlighting.com - TVL3000WW/TVL3000CW Instruction Manual Page 12
Universal DMX Control
This function allows you to use a Elation
"DIMM" is displayed, and press

Installation

®