Chevrolet Colorado 2012 Owner's Manual page 99

Extended Cab Rear Seat
1. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child
restraint with the top tether and
the safety belts. Refer to your
child restraint manufacturer
instructions and the instructions
in this manual.
1.1. Find the lower anchors (D)
for the desired seating
position.
1.2. Put the child restraint on
the seat.
1.3. Attach the lower
attachments on the child
restraint to the lower
anchors (D) in the vehicle.
The child restraint
instructions will show
you how.
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
2. If the child restraint manufacturer
recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor (C). Refer to the child
restraint instructions and the
following steps:
2.1. Pull on the finger access
tab to remove the cover to
access the top tether
anchors (C).
3-51