Table of Contents
Advertisement
7-28
Infotainment System
Ending a Call
To end a call:
1. Press and release
.
2. Say End Call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To mute a call, press
, and then
say Mute Call.
To cancel mute, press
, and then
say Un mute Call.
Transferring a Call
Audio can be transferred between
the Bluetooth system and the cell
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
ignition is turned to ON/RUN.
To Transfer Audio From the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
1. Press and release
.
2. Say Transfer Call.
To Transfer Audio to the Bluetooth
System From a Cell Phone
During a call with the audio on the
cell phone, press
for more than
two seconds. The audio transfers to
the vehicle. If the audio does not
transfer to the vehicle, use the audio
transfer feature on the cell phone.
See your cell phone manufacturer's
user guide for more information.
I n f o r ma t i o n P r o v i d e d b y :
Voice Pass-Thru
Voice Pass Thru allows access to
the voice recognition commands on
the cell phone. See the cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
This feature can be used to verbally
access contacts stored in the cell
phone.
1. Press and release
.
2. Say Bluetooth. This command
can be skipped.
3. Say Voice.
The cell phone's normal
prompt messages will go
through its cycle according
to the phone's operating
instructions.
Advertisement
Chapters
Table of Contents
