Table of Contents
Advertisement
Recommended Transfer Case Settings
Driving Conditions
Normal
Severe
Extreme
Vehicle in Tow*
*See Recreational Vehicle Towing on page 10 91 or Towing the Vehicle on
page 10 91 for further information.
Shifting into Four Wheel Low
will turn Traction Control and
®
StabiliTrak
off. See Traction
Control System (TCS) on page 9 47
®
and StabiliTrak
System on
page 9 48 for more information.
Transfer Case Settings
2
4
4
YES
YES
YES
Use these buttons to shift into and
out of four-wheel drive. You can
choose from the following:
2 (Two-Wheel High): This setting
is for driving in most street and
highway situations. The front axle is
not engaged in two-wheel drive.
I n f o r ma t i o n P r o v i d e d b y :
Driving and Operating
{
WARNING
Shifting the transfer case to
N
N (Neutral) can cause the vehicle
to roll even if the transmission is
in P (Park). You or someone else
could be seriously injured. Be
sure to set the parking brake
before placing the transfer case in
YES
N (Neutral). See Parking Brake on
page 9 45.
N (Neutral): Shift the vehicle's
transfer case to N (Neutral) only
when towing the vehicle.
4 (Four-Wheel High): This
setting engages the front axle to
help drive the vehicle. Use
four-wheel high when you need
extra traction, such as on snowy or
icy roads, or in most off-road
situations.
9-41
Advertisement
Chapters
Table of Contents
