Table of Contents
Advertisement
3-50
Seats and Restraints
If the child restraint has a
dual tether, route the tether
over the seatback.
2.3. Attach the top tether to the
anchor (A). Make sure that
you secure the top tether to
the top tether anchor and
not to the seatback
latch (B).
2.4. Push rearward on the
seatback until it locks into
its upright position. Push
and pull on the seatback to
make sure it is secured
properly.
3. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child
restraint with the top tether and
the safety belts. Refer to your
child restraint manufacturer
instructions and the instructions
in this manual.
I n f o r ma t i o n P r o v i d e d b y :
3.1. Find the lower anchors for
the desired seating
position.
3.2. Attach and tighten the lower
attachments on the child
restraint to the lower
anchors.
4. Tighten the top tether.
5. Before placing a child in the
child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
LATCH path and attempt to
move it side to side and back
and forth. There should be no
more than 2.5 cm (1 in) of
movement for proper installation.
Advertisement
Chapters
Table of Contents
