Chevrolet Colorado 2012 Owner's Manual page 160

7-12 Infotainment System
If the radio cannot find the desired
program type, NONE displays and
the radio returns to the last tuned
station.
Finding an XM Channel
BAND: Press to switch between
FM1, FM2, AM, or XM1 or XM2
(if equipped). The selection
displays.
DISPL (Display): Press to retrieve
four different categories of
information related to the current
song or channel: Artist, Song Title,
Category or PTY, Channel Number/
Channel Name.
TUNE : Turn to select XM
Channels.
SEEK : Press to go to the
previous or next channel and stay
there.
SCAN : Press and hold for
more than two seconds, SCAN
displays and the radio beeps once.
The radio goes to a channel, plays
for a few seconds, then goes to the
next channel. Press or
to stop scanning presets.
To scan preset channels, press
and hold or for more than
four seconds, PSCN displays and
the radio beeps once. The radio
goes to a preset channel, plays for a
few seconds, then goes to the next
preset channel. Press or
to stop scanning presets.
Setting Preset Channels
If the radio has XM, up to
30 stations (6 FM1, 6 FM2, 6 AM,
6 XM1, and 6 XM2) can be
programmed on the six numbered
pushbuttons.
I n f o r ma t i o n P r o v i d e d b y :
To program either radio:
1. Tune in the desired channel.
2. Press and hold one of the six
numbered pushbuttons until the
radio beeps once. When that
again,
numbered pushbutton is pressed
again, the channel that was
stored, returns.
3. Repeat the steps for each
pushbutton.
XM Radio Messages
XL (Explicit Language
Channels): These channels, or any
again,
others, can be blocked at a
customer's request, by calling
1-800-929-2100 in the U.S. and
1-877-438-9677 in Canada.
Updating: The encryption code in
the receiver is being updated, and
no action is required. This process
should take no longer than
30 seconds.