Table of Contents
Advertisement
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press and release
.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re dial Command
1. Press and release
.
2. After the tone, say Re dial.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle. Press
and release
to answer the call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Press and release
to answer
an incoming call when another
call is active. The original call is
placed on hold.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Press and release
return to the original call.
To ignore the incoming call,
continue with the original call
with no action.
Three Way Calling
Three Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
1. While on a call press and
release
.
2. Say Three way call.
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
to link all the callers
together.
7-27
again to
Advertisement
Chapters
Table of Contents
