Sip Config - D-Link DPH-400G User Manual

Field name
SIP Line
Choose line to set info about SIP, there are 5 lines to choose. You can switch
by【Load】button.
Basic Settings
Status
Server Address
Server Port
Authentication User
Authentication
Password
SIP User
Display Name
Proxy Server Address
Proxy Server Port
Proxy User
Proxy Password
Domain Realm
Backup Server
Address
Backup Server Port

SIP Config

explanation
Shows if the phone has been registered the SIP
server or not; or so, show Unapplied.
Input your SIP server address.
Set your SIP server port.
Input your SIP register account name.
Input your SIP register password.
Input the phone number assigned by your VoIP
service provider. Phone will not register if there is
no phone number configured.
Set the display name.
Set proxy server IP address(Usually, Register SIP
Server configuration is the same as Proxy SIP
Server. But if your VoIP service provider give
different configurations between Register SIP Server
and Proxy SIP Server, you need make different
settings).
Set your Proxy SIP server port.
Input your Proxy SIP server account.
Input your Proxy SIP server password.
Set the sip domain if needed, otherwise this VoIP
phone will use the Register server address as sip
domain automatically. (Usually it is same with
registered server and proxy server IP address).
Input the Backup Server Address, if the primary
server is unavailable , then the phone will enable the
Backup Server Address
Specify the Backup Server Port