Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain the
parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint will
go by the following process to try to obtain the server address and other
parameters, when it boots up:
DHCP option
Field name
Auto Update
Setting
Current Config
Version
Common Config
Version
Auto Provision
explanation
Show the current config file‟s version. If the version
of the configuration downloaded is higher than the
version of the running configurations, the auto
provision would upgrade, or stop here. If the endpoints
confirm the configuration by Digest method, the
endpoints wouldn‟t upgrade configuration unless the
configuration in the server is different with the
running configuration.
Show the common config file‟s version. If the
configuration
downloaded
and
the
running