Table of Contents
Advertisement
HTTPS Port
Telnet Port
RTP Port Range
Start
RTP Port Number
Notice:
1) You need save the configuration and reboot the phone after set this page.
2) Please REBOOT the system if you modify the HTTP or telnet port
number (the new number should be greater than 1024.)
3) If you set 0 for the HTTP port, it will disable HTTP service.
TIME&DATE
8.3.2.4
Setting time zone and SNTP (Simple Network Time Protocol) server according
to your location, you can also manually adjust date and time in this web page.
value is 8090, the accessing address is
http://192.168.1.70:8090.
Before using the https, you must download https
authentication certification into the phone, then
set web browser port, the default is 443 port，if you
want to enhance system safety，you'd better change it
into non-443 standard port. You can access to the web
in https after rebooting the phone.
Set Telnet Port, the default is 23. You can change the
value into others.
Example: The IP address is 192.168.1.70. the telnet
port value is 8023, the accessing address is telnet
192.168.1.70 8023.
Set the RTP Start Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is
200.
Advertisement
Table of Contents
