Remote Sms Command And Control - Wideye Sabre Ranger User Manual

Chapter 4 - Using SABRE™ Ranger for Remote Unmanned SCADA Applications
Remote SMS IP Activation and Deactivation
Remote SMS Activation of IP Connection
To use Remote SMS Activation of IP Connection, use the CONNECT command with the following syntax:
SABRE,CONNECT,<APN>,<Username>,<Password>
For example:
SABRE, CONNECT, "bgan.inmarsat.com", "SNGT125", "bedru8huty"
Note:
If there is no username and password, then the syntax will be:
SABRE, CONNECT, "bgan.inmarsat.com", "", ""
Remote SMS De-activation of IP Connection
To use Remote SMS De-activation of IP Connection, use the DISCONNECT command with the following syntax:
SABRE,DISCONNECT
Remote SMS To Reboot The Terminal
Remote SMS To Reboot The Terminal
To reboot the terminal remotely, use the RESET command with the following syntax:
SABRE,RESET,<Password>
Note:
The default password is eyediw1234.
For example:
SABRE, RESET, "eyediw1234"
Note:
All SMS commands are case sensitive.
The SMS commands will not be stored in the Inbox.
48