Wideye Sabre Ranger User Manual page 46

Primary Profiles
Primary profiles define the connection type. You can select from a list of profiles to be the default primary profile
and connection type. You can customized all the 10 primary profiles available on the list.
Note:
The Standard profile is set as the default primary profile and the default connection type is standard (this is
charged by the volume [in kilobytes] of data used).
 Profile Name
Change the profile name as desired.
 Connection Type
Select the connection type to be used during the connection:
Standard – Charged by the volume (in kilobytes) of data used.
Streaming – Charged by the time (per minute) used during the connection.
 Access Point Name (APN)
By default, the APN from the SIM will be selected.
Follow these steps to change the Access Point Name (APN):
1. Select User Defined.
2. Enter the new APN in the field space provided.
3. Enter the username and password if required.
 IP Configuration
By default, the Dynamic IP Address is selected.
Follow these steps to use Static IP Address:
1. Select Static IP Address and enter the IP Address in the space provided.
2. Check the Header Compression checkbox if it is required to use Header Compression.
Chapter 3 - Using SABRE TM Ranger Web Console
35