Network
Select Auto or Manual for Network registration when SABRE™ Ranger terminal is powered up.
Auto: SABRE™ Ranger terminal will automatically register to the network when it is powered up.
Manual: You will need to click Network Registration on the Setup page to register to the network.
Click Update Settings after you have made your selection.
ATCmd
Enter the AT Commands in the text editor.
Click Send to register the AT Commands.
To remove the commands from the text editor, click Clear.
Misc
Click Reboot to reboot the SABRE™ Ranger terminal.
To perform a Factory Reset, enter the Security code 0000 and click Factory Reset.
The settings of the SABRE™ Ranger terminal will be reset to the default settings.
Chapter 3 - Using SABRE
TM
Ranger Web Console
45