Powering Up The Sabre Tm Ranger (V1 Variant) - Wideye Sabre Ranger User Manual

Chapter 2 - Setting Up the SABRE
3. Secure the length of the Multi-function and Heater power cables to the pole or column using cable ties.
Note:
Ensure there is some slack at both ends of the Multi-function and Heater power cables to avoid stress build-up,
which may damage the cable glands.
Powering Up the SABRE
Follow these steps to power up the SABRE™ Ranger (V1 variant) terminal:
1. Insert the power adapter output connector into the DC power input socket on the Multi-function cable.
2. Insert the plug end of the power adapter into an AC outlet.
DC power
input cable
3. Turn on the power to power up the SABRE™ Ranger terminal.
12
Ranger
TM
TM Ranger (V1 Variant)
Phone
port
Ethernet
port
DC power
input
socket
Multi-function cable