Wideye Sabre Ranger User Manual page 49

Chapter 3 - Using SABRE
Port Forwarding
Port Forwarding is a feature for Router (multiple-user) mode. This feature sets the SABRE™ Ranger terminal to direct
incoming traffic on certain TCP/UDP port to a specific port on a local PC (IP Address).
Follow these steps to add a new forwarding rule:
1. Click Add.
2. Enter the Incoming Port number in the space provided.
(For example: the user expecting HTTP, the port is 80).
3. Enter the Destination IP Address.
(For example: the IP Address of the PC that is connected to the SABRE™ Ranger terminal).
4. Select the Protocol type:
 TCP (for HTTP, it will be TCP)
 UDP
5. Enter the Destination Port number in the space provided.
[For example: listening port of the particular service (TCP port 80 for web server) on the PC that is
connected to the SABRE™ Ranger terminal].
6. Click Apply to allow the settings to take effect.
38
TM Ranger Web Console