Settings Menu; Chapter 4 - Using Sabre - Wideye Sabre Ranger User Manual

Settings
You can select the Ethernet mode to be used for data connection.
Follow these steps to select the Ethernet mode:
1. Select the mode to be used during the data connection.
2. Check the Auto PDP Context Activation checkbox if it is required to use Auto PDP Context Activation.
 Click Update to allow the selection to take effect.
 Click Refresh to query the current mode.
Note:
If the Auto PDP Context Activation is enabled, the terminal will establish a PDP connection upon power
up. After that, if the PDP connection is lost due to network deregistration or reasons other than user
intervention, the terminal will reestablish the PDP connection automatically.

Settings Menu

Click to select the Data menu.
Click the following tabs to view and edit the configuration settings for the SABRE™ Ranger terminal.:
 Language
 Terminal Info
 Terminal
 Ethernet
 Telephony
 PIN
 SMS
 Audio
 ATCmd
 Misc
 Support
 About
Chapter 3 - Using SABRE
TM
Ranger Web Console
39