Chapter 6 Cloning Mode; Entering Cloning Mode; Cloning Using The Cloning Cable - Motorola DTR Series DTR410 User Manual

Chapter 6 Cloning Mode

Cloning mode is used to either add contacts wirelessly to other radios or duplicate all radio settings
to new radios (using the optional cloning cable).
Cloning also allows all radios to maintain a contact list so that User Name is shown rather than User
ID when receiving voice and data calls.

Entering Cloning Mode

1. Press
2. Enter the cloning mode by performing the following steps in sequence:
a. Hold down
b. Press the Left
c. Press
d. Press the Right
e. Hold down

Cloning Using the Cloning Cable

1. From the Clone menu, scroll to select Duplicate Radio and press
lowing screen is displayed indicating the target radio must now be connected to the source
radio to be cloned using the cloning cable.
6875840M01-A
to turn the source radio on.
and press the PTT button three times.
.
.
and press the PTT button three times. The Clone Menu appears.
Clone Menu
Duplicate Rad...
Send Contact
Select
Connect Clone
Cable and
Press Clone
Clone
Reset
Back
under Select. The fol-
February 2008