Motorola DTR Series DTR410 User Manual page 66

6-4
8. Scroll to the contact to receive the new contact.
9. Press
10. Press
these are correct press
are not correct press
If cloning was successful, both the source and targets radios indicated "Programming Successful". If
over-the-cloning fails, the radio displays the failed member so the user can attempt cloning again.
For more information on DTR products, visit the following website at: <http://www.motorola.com/DTR/>.
February 2008
under Select to select the contact.
Send Contact
Add:Security
To:Joe Smith
Change
under Prgm. The screen is displayed showing the Add: and To: selections. If
under Go to transmit the selection over the air. If the selections
under Back to return to the selection menu.
Press Go To
Add:Security
To:Joe Smith
Over The Air
Go
Cloning Mode: Cloning by Sending a Contact
Prgm
Back
6875840M01-A