Table of Contents
Advertisement
4-6
Selecting Group Only
Selecting Group Only on a radio prohibits the user from initiating PrivateCalls.
1. Scroll to select Group Only and press
appears.
NOTE: A
next to an selection indicates the present selection.
2. Scroll to select the desired entry and press
previous screen with the new Group Only entered.
Entering a Ringer Type
A unique alert tone can be identified for each radio in your contact list. There are 12 ringer tones that
can be selected. When a ringer tone is highlighted, the audio ringer tone sounds to help in making a
selection.
1. Scroll to select Ringer and press
NOTE: A
next to a selection indicates the present selection.
2. Scroll to select the desired ring. Highlighting a tone lets you hear it.
3. Press
with the new Ringer entered.
4. Press
been completed. A confirmation screen appears confirming the saved contact.
5. Press
Reset.
February 2008
Group Only
Yes
None
No
Select
Ringer
1
2
3
Select
under Select to select the new ring. The display returns to the previous screen
under Save to store the new contact after all entries for the new contact have
to exit Programming mode and return to the Main Menu. Press
Programming the Radio: Adding Contacts
under Change. The Group Only screen
Back
under Select. The display returns to the
under Change. The Ringer screen appears.
Back
under
6875840M01-A
Advertisement
Table of Contents
