6-2
2. Connect the cloning cable to both radios.
NOTE: The target radio must be turned on, but does not need to be in cloning mode.
3. Press
followed by the "Cloning Successful" screen. If a problem occurs the "Cloning Failed" screen
appears.
4. After cloning is completed, the target radio displays the following screen.
5. Turn target radio off then back on again to use.
6. Press
February 2008
under Clone to start the cloning. The "Cloning in Progress" screen is displayed
Radio Cloning
Completed
Please Turn Off.
under Reset to exit the Clone menu.
Cloning Mode: Cloning Using the Cloning Cable
6875840M01-A