Reboot; Overview; What You Need To Know; The Reboot Screen - ZyXEL Communications UAG4100 User Manual

45.1 Overview

Use this to restart the device (for example, if the device begins behaving erratically). See also
Section 1.5 on page 31

45.1.1 What You Need To Know

If you applied changes in the Web configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; (see
configuration.

45.2 The Reboot Screen

The Reboot screen allows remote users to restart the device. To access this screen, click
Maintenance > Reboot.
Figure 319 Maintenance > Reboot
Click the Reboot button to restart the UAG. Wait a few minutes until the login screen appears. If
the login screen does not appear, type the IP address of the device in your Web browser.
You can also use the CLI command reboot to restart the UAG.
C
HAPTER
for information on different ways to start and stop the UAG.
Section 47.1 on page
UAG4100 User's Guide
445
453) reset returns the device to its default
4 5

Reboot