24.4.1 Adding/Editing an Advertisement URL
Click Configuration > Web Authentication > Advertisement and then the Add (or Edit) icon
in the Advertisement Summary section to open the Add/Edit Advertisement URL screen. Use
this screen to configure an advertisement address entry.
Note: You can create up to 20 advertisement URL entries. The UAG randomly picks one
and open the specified web site in a new frame when an authenticated user is
attempts to access the Internet.
Figure 162 Configuration > Web Authentication > Advertisement > Add/Edit
The following table gives an overview of the objects you can configure.
Table 106 Configuration > Web Authentication > Advertisement > Add/Edit
LABEL
Enable
Name
URL
Preview
OK
Cancel
Chapter 24 Web Authentication
DESCRIPTION
Select this to activate the entry.
Enter a descriptive name for the advertisement web site.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are not allowed. The first character must be a letter.
Enter the URL or IP address of the web site.
Use "http://" followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-_!~*'()%). For
example, http://www.example.com or http://172.16.1.35.
Click this button to open the specified web site in a new frame.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving.
UAG4100 User's Guide
237