Default User Settings Edit Screens - ZyXEL Communications UAG4100 User Manual

Table 141 Configuration > Object > User/Group > Setting (continued)
LABEL
Reach maximum number
per account
User Lockout Settings
Enable logon retry limit
Maximum retry count
Lockout period
Apply
Reset

31.4.1 Default User Settings Edit Screens

The Edit User Default Settings screen allows you to set the default authentication timeout
settings for the selected type of user account. These default authentication timeout settings also
control the settings for any existing user accounts that are set to use the default settings. You can
still manually configure any user account's authentication timeout settings.
To access this screen, go to the Configuration > Object > User/Group > Setting screen (see
Section 31.4 on page
Edit icons.
Figure 203 Configuration > Object > User/Group > Setting > Edit
Chapter 31 User/Group
DESCRIPTION
Select Block to stop new users from logging in when the Maximum number
per access account is reached.
Select Kick previous user and login to disassociate the first user that logged
in and allow new user to log in when the Maximum number per access
account is reached.
Select this check box to set a limit on the number of times each user can login
unsuccessfully (for example, wrong password) before the IP address is locked
out for a specified amount of time.
This field is effective when Enable logon retry limit is checked. Type the
maximum number of times each user can login unsuccessfully before the IP
address is locked out for the specified Lockout period. The number must be
between 1 and 99.
This field is effective when Enable logon retry limit is checked. Type the
number of minutes the user must wait to try to login again, if logon retry limit
is enabled and the Maximum retry count is reached. This number must be
between 1 and 65,535 (about 45.5 days).
Click Apply to save the changes.
Click Reset to return the screen to its last-saved settings.
299), and select one of the Default Settings section's entry and click the
UAG4100 User's Guide
302