User Aware Login Example - ZyXEL Communications UAG4100 User Manual

The following table describes the labels in this screen.
Table 142 Configuration > Object > User/Group > Setting > Edit
LABEL
User Type
Lease Time
Reauthentication
Time
OK
Cancel

31.4.2 User Aware Login Example

Access users cannot use the Web Configurator to browse the configuration of the UAG. Instead,
after access users log into the UAG, the following screen appears.
Figure 204 Web Configurator for Non-Admin Users
Chapter 31 User/Group
DESCRIPTION
This read-only field identifies the type of user account for which you are configuring the
default settings.
• admin - this user can look at and change the configuration of the UAG
• limited-admin - this user can look at the configuration of the UAG but not to
change it.
• ext-user - this user account is maintained in a remote server, such as RADIUS. See
Ext-User Accounts on page 293
• ext-group-user - this user account is maintained in a remote server, such as
RADIUS. See Ext-Group-User Accounts on page 293
type.
• guest-manager - this user can log in via the web configurator login screen and
create dynamic guest accounts using the Account Generator screen that pops up.
• pre-subscriber - this user has access to the UAG's services but cannot look at the
configuration.
Enter the number of minutes this type of user account has to renew the current session
before the user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to
make the number of minutes unlimited.
Admin users renew the session every time the main screen refreshes in the Web
Configurator. Access users can renew the session by clicking the Renew button on their
screen. If you allow access users to renew time automatically (see
299), the users can select this check box on their screen as well. In this case, the
session is automatically renewed before the lease time expires.
Select this option and type the number of minutes this type of user account can be
logged into the UAG in one session before the user has to log in again. You can specify 1
to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Unlike
Lease Time, the user has no opportunity to renew the session without logging out.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving your changes.
UAG4100 User's Guide
303
for more information about this type.
for more information about this
Section 31.4 on page