Barco RLS W12 Reference Manual page 4

1.1 Interface and Requirements
Control Command Protocol
The RS-232 Commands use only ASCII characters which can be entered using a typical terminal emulator like Windows
HyperTerminal with the following setting:

Bits per second: 115200

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None
TCP/IP communication port
The TCP/IP communication port number: 43680
1.2 Cable Type and Pin definition
Diagram:
Note:

Use Straight through RS232 cable.

Pin 9 is reserved for service purpose only.
4
1. MSWU-81E Serial Communication
MSWU-81E – 2014/10/30