Oil Pan - Chevrolet Chevelle 1977 Repair Manual

Oil Screen
1. Thoroughly clean, air dry and inspect oil screen
assembly.
2. Install new oil screen gasket on screen and retain
with petrolatum.
3. Install oil screen assembly and attaching bolts (Fig.
7A-166A). Torque bolts to 13.0-17.0 N -m (9-12 ft. lbs.).

Oil Pan

1. Clean and inspect oil pan for damage.
2. Install new oil pan to case gasket on case.
3. Install oil pan and retaining bolts. Torque bolts to
14.0-18.0 N -m (10-13 ft. lbs.).
M A N U A L DETENT
ROLLER & SPRING
ASSEMBLY
[
Fig. 7 A -1 6 3 A -ln s ta lling Manual Detent Roller and Spring
Assembly
AUTOMATIC TRANSMISSION
INTERMEDIATE LINE RNDI
BOOST
Fig. 7 A - 16 2 A --L o c a tio n of Four Ch eck Balls
D IRECT D IRECT CLUTCH TV EXHAUST
CLUTCH ACCUMULATOR
Speedometer Driven Gear (Fig. 7A-167A)
Inspection
1. Remove speedometer driven gear from housing and
inspect for damage.
2. Inspect housing for damage and "O" ring for damage
or cuts.
3. If damaged, remove and discare "O" ring.
Reassembly
1. If removed, install new "O" ring on housing.
2. Install speedometer driven gear into housing.
3. Install speedometer driven gear assembly into case
(Fig. 7A-167A).
,TV EXHAUST V A LV E
LIFTER SPRING
THROTTLE
LEVER =
! N EXHAUST
t v
TO CABLE
V A LV E LIFTER
LINK
Fig. 7 A -1 6 4 A -T h ro ttle Lever and Bracket Assembly
(200)7A-41
REV ERSE BOOST
PUMP INTAKE
PART THRO TTLE
LINE BOOST
4 CHECK B A LLS
(NOTE: 5TH CHECK
B A LL IN CASE)