Chevrolet Chevelle 1977 Repair Manual page 293

PARK LOCK LOCK BRACKET
Fig. 7 A-2 5 B--R e m o vin g Park Lock, Lock B ra cke t
12. Remove parking lock; lock bracket (fig. 7A-25B).
(Special Bolts).
13. Remove parking pawl disengaging spring (fig. 7A-
26B).
14. Remove parking pawl shaft retaining plug, parking
pawl shaft, and parking pawl (fig. 7A-27B) if replacement is
required.
PARKING PAWL
D I S E N G A G I N G SPRING
Fig. 7A-26B-Removing Parking Pawl Disengaging Spring
AUTOMATIC TRANSMISSION
A C T U A T I N G R O D
PARKING P A W L j
m
i v ^ IVIBIBH|aa|aH|pp_q
■ f t # A B m m %
PARKING PAWL SHAFT
R E TAIN ING PLUG
Fig. 7 A -2 7 B --P a rk in g Pawl S h a f t Retaining Plug, Parkin g Pawl
S h a fta n d Parkin g Pawl
NOTE:
The parking pawl shafts retaining plug may be
removed by using a bolt extractor.
15. Remove interm ediate servo piston and seal ring.
Remove washer, spring seat and apply pin (fig. 7A-28B).
INTERMEDIATE SERVO
PISTON A N D SEAL
W ASHER
/ APPLY PIN
SPRING SEAT
Fig. 7A-28B~lnterm ediate Servo Piston and Related Parts
(350)7A-9
PARK PAWL
SHAFT
SPRING