How To Select Tracks During Playback; How To Select An Edl Mark; How To Adjust Record Level; How To Adjust Record Balance - Marantz PMD570 Professional User Manual

Controls and Connections
Front continued
SOLID STATE RECORDER PMD570
POWER ON/OFF HEADPHONE LEVEL
0 10
10. Jog Wheel continued
Push and release the Jog Wheel to:
• + select the displayed EDL mark for
SHIFT
playback or editing
• select displayed setting (Menu or Edit Menu)
• set A-B repeat position (during playback)

How to select tracks during playback

Turn the Jog Wheel to choose the track when in stop,
play or play pause. The PMD570 switches to the
beginning of that track.

How to select an EDL mark

When in stop, playback or play pause, push and hold
and turn the Jog Wheel to choose an EDL
SHIFT
mark. The PMD570 jumps to the selected mark.
Example
display
Note:
Nothing happens if there are no EDL marks on the CF card.
When the desired EDL mark is displayed, release the
button to jump to that mark.
SHIFT
• Push and release the Play/Pause button
start or continue playback from the EDL mark.
• Push and release the Jog Wheel to edit the EDL
mark type. See How to edit EDL marks, page 45.

How to adjust record level

Turn the Jog Wheel to set or adjust the record level
(Vol.) during recording or in record pause.
Example
display
The record level can be from 0 to -78 dB.
Turn slowly to adjust 1 dB at a time.
Turn quickly to adjust 5 to 15 dB at a time.
DISPLAY MENU/STORE
REC LEVEL/SELECT
TOTAL TRACKTIME A-B
REC REMAIN kbps L
-dB
LOCK kHz 00 40 20 1 6 2 0 over EDIT UNDO M. RESET
R 2
AM
PM
S.SKIP -dB
SHIFT
TRACK
MARK LINE
MARK CANCEL
REC BAL
TRACKTIME
L
-dB 00 20
40
R
TRACKTIME
L
-dB 00 12
40 20
R
TRACK
LINE
The record level setting is remembered, even after
power off, so you do not have to do anything else to
10
confirm or store it.

How to adjust record balance

PUSH
ENTER
First check or adjust the record level (above). Push and
MARK
hold
SHIFT
adjust the record balance during recording or in record
pause.
Record balance maintains the record level of the target
channel and reduces the record level of the other
channel in 1 dB increments. For example, if you press
and hold
SHIFT
right, the right channel record level is not changed, and
the left channel record level is reduced 5dB.
Balance is displayed graphically.
Example
display
The LR Balance bar displays up to 18 (1dB) clicks of
the Jog Wheel to the right or 18 clicks to the left.
12 0
6 2 over
When balance is as desired, release the
-dB
The record balance setting is remembered, even after
power off, so you do not have to do anything else to
confirm or store it.

How to A-B repeat

to
During playback, push and release the Jog Wheel to
set the A point.
Example
display
Push and release the Jog Wheel again to set the B
point.
6 2 0 over
-dB
Example
display
Playback repeats endlessly between the A and B
points.
- 19 -
while you turn the Jog Wheel to set or
and turn the Jog Wheel 5 clicks to the
TRACKTIME
TRACK
18 + 6-17 1-5 0 1-5 6-17 18 +
TRACKTIME A-
TRACK
TRACKTIME A-B
TRACK
L
-dB 00 20 12 0
40 6 2 over
R
-dB
LINE
button.
SHIFT
A-
L
-dB 00 20 12 0
40 6 2 over
R
-dB
A-B
L
-dB
00 40 20 12 6 2 0 over
R
-dB
continues