Display Button - Marantz PMD570 Professional User Manual

Controls and Connections
Front continued
5
SOLID STATE RECORDER PMD570
POWER ON/OFF HEADPHONE LEVEL
0 10
5. CF card
continued
1. Remove the plastic pin
(c) and then the retainer
(d).
2. Add the screw. Tighten the screw with a small
Phillips screwdriver enough so that the screw
cannot be removed with a fingernail.
POWER ON/OFF
DISPLAY
6a. DISPLAY button
Push and release to tab through
alternate information displays.
LOCK
Display information is slightly different in Stop,
Record and Playback.
During Stop:
Default display is
remaining record
time for the card.
After the first push
track information is
displayed.
6
DISPLAY MENU/STORE
TOTAL TRACKTIME A-B
REC REMAIN kbps L
-dB 00 40 20 1 6 2 0 over EDIT UNDO M. RESET
LOCK kHz 2
R
AM
PM
S.SKIP -dB
SHIFT
TRACK
MARK LINE
MARK CANCEL
SOLID STATE RECORDER PMD570
DISPLAY MENU/STORE
TOTAL TRACKTIME A-B
REC REMAIN kbps L
HEADPHONE LEVEL
LOCK kHz -dB 00 40 20 1 2 6 2 0 over EDIT UNDO
R
AM
PM
SHIFT S.SKIP -dB
TRACK
MARK LINE
0 10 MARK CANCEL
remaining record time on card
TIME
L
REC REMAIN
-dB
00 40 20 12
R
LINE
Example display
Total tracks on CF card.
L
-dB 00 20
40
R
TRACK
LINE
After the second push
EDL mark information
is displayed.
REC LEVEL/SELECT
PUSH
ENTER
MARK
REC BAL
After the third push
file parameters are
displayed.
After the fourth
d
push Date and Time
information is
c
displayed.
After the fifth push the display returns to the default:
remaining record time on the CF card.
During Record:
REC LEVEL/SELECT
M. RESET
Default display is
PUSH
ENTER
MARK
REC BAL
elapsed record time
on the current track*.
The first push of the DISPLAY button switches to
remaining record time for the card.
The second push switches to file parameters.
The third push switches to date and time.
The fourth push returns to the default.
*When there are 5 minutes of recording time remaining
on the CF card, the display automatically switches to
indicate remaining recording time on the CF card and
the REC, REMAIN and TIME will be flashing.
During Playback:
6 2 0 over
The default display is
-dB
elapsed time on the
current track.
The first push switches to track time remaining.
The second push switches to file parameters.
12 0 over
6 2
-dB
The third push switches to date and time.
The fourth push returns to the default.
- 14 -
Total EDL marks on CF card.
L
-dB
00 40
R
MARK
sampling frequency
bit rate
L
kbps
-dB 00
40
kHz
R
compression
recording
algorithm
channels
Current clock time
hours:minutes:seconds
TIME
L
-dB
00 40
R
PM
record time on track
TRACKTIME
L
-dB
00 40
R
TRACK
LINE
elapsed time
TRACKTIME
L
-dB
00 40
R
TRACK
20 12 6 2 0 over
-dB
20 12 0 over
6 2
-dB
20 12 6 2 0 over
-dB
20 12 6 2 0 over
-dB
20 12 6 2 0 over
-dB