Interlogix TVD-5110-3 Pocket Manual

Dome camera

TVD-5110-3 Dome Camera

Pocket Guide

Overview

This is the Pocket Guide for TVD-5110-3-P/ TVD-

5110-3-N Dome Camera. This guide describes a

standard installation.

The camera consists of the following:

•

Camera with power and video output cable

Refer to the figures when performing the camera

setup procedures.

P/N 1072503B • ISS 18DEC12

Table of Contents

Need help?

Do you have a question about the TVD-5110-3 and is the answer not in the manual?

Page 1 TVD-5110-3 Dome Camera Pocket Guide Overview This is the Pocket Guide for TVD-5110-3-P/ TVD- 5110-3-N Dome Camera. This guide describes a standard installation. The camera consists of the following: • Camera with power and video output cable Refer to the figures when performing the camera setup procedures.
Page 2 Figure 1: Parts of the camera A. Video cable B. Power cable C. D/N sensor (Do not cover with the shroud)
Page 3 Figure 2: mounting sticker template (mm)
Page 4: Installation
Installation To install the camera: Fasten the camera to a wall or ceiling (or another solid surface). The camera must be stable when connected. Connect the 75 Ω coaxial cable to the video output. Connect the power cable to the camera. Adjust the camera position and angle as required.
Page 5: Contact Information
Regulatory information © 2012 UTC Fire & Security Americas Corporation, Inc. Interlogix is part of UTC Climate Controls & Security, a unit of United Technologies Corporation. All rights reserved. Trademarks and patents The IFS name and logo are trademarks of United Technologies.
Page 6 communications. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ACMA compliance Notice! This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Tvd-5110-3-pTvd-5110-3-n