Table of Contents
Advertisement
Playback using the LCD
Monitor
You can also use the LCD monitor to
play back your recording.
1
POWER
180°
90°
90°
2
OPEN
3
REWIND
SEARCH
Connecting Earphone
(not supplied)
DV203-K.p 33-36.p65
Playback Your Recordings
Before you begin
• Connect the Palmcorder to a power
source. (pp. 16, 17)
• Insert a recorded cassette.
1
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
VCR position.
2
Use OPEN tab on underside of the
LCD monitor to unlock.
3
Press
rewind the tape.
4
Press
5
Press
• When the tape reaches its beginning
during rewind or rewind search, it will
stop automatically.
4
PLAY
Note
• When a tape recorded in LP mode on
another digital video camera is played
5
STOP
back on this unit, the picture may appear
mosaic.
• Using the LCD monitor reduces battery
operating time.
• You can place the Palmcorder on a table,
etc. for viewing. Rotate the LCD Monitor
180° and swing it up against the
Palmcorder body as shown.
You can connect earphones (not supplied)
to the EARPHONE Jack.
EARPHONE
Jack
33
(REWIND/SEARCH) to
(PLAY) to start playback.
(STOP) to stop playback.
33
2003/06/11, 13:30
Advertisement
Table of Contents
