Table of Contents
Advertisement
Palmcorder USB Device Driver/SD Drive
Connection (for Palmcorder USB Device Driver/SD Drive)
Note
• For Palmcorder USB Device Driver/SD Drive, do not connect the i.LINK and USB
terminals to the Palmcorder at the same time.
1
Turn on your PC.
2
Set the Palmcorder POWER to M-CARD.
For Windows XP users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CONNECT WITH PC" and "STORAGE" appears in the EVF or the LCD monitor.
• The "Found New Hardware Wizard" screen of Windows is displayed.
Note
• When connecting for the first time using Windows XP, the OS installation CD may be
required.
Follow the instructions as they appear on your PC screen.
• For extended use, the AC Adaptor should be used as a power source.
76
DV203-K.p 76-78.p65
2
USB Terminal
3
USB Cable (supplied)
76
USB Terminal
2003/06/11, 13:30
Advertisement
Table of Contents
