Table of Contents
Advertisement
Special Effect Features
View Recording/Playback on
your TV
[ TV with AUDIO/VIDEO IN Jacks ]
A/V OUT
Audio In
A/V Cable
(Supplied)
To Audio In
[ TV with S-VIDEO IN Jacks ]
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV.
DC Cable (Supplied)
A/V OUT
Audio In S-Video In
A/V Cable
(Supplied)
To Audio In
S-Video Cable
(Not supplied)
40
DV203-K.p 37-40.p65
Before you begin
• When using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal. (p. 17)
1
Set POWER to CAMERA or VCR.
To view what the Palmcorder is
recording or to play back a tape on
your TV.
2
Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
Back of TV
for further information.
Video In
3
Start playback or begin a recording.
• Make sure the Palmcorder and TV are
turned off while connecting.
To Video In
• Please connect the A/V Cable securely.
Note
(Remote Control Only)
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on the remote control.
Press again to remove the indications.
DISPLAY
S-VIDEO OUT
ON TV
Back of TV
To S-Video In
40
2003/06/11, 13:30
Advertisement
Table of Contents
