Panasonic Digital Palmcorder MultiCam PV-DV203-K Operating Instructions Manual page 83

For Windows 2000 users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "Found New Hardware" is displayed.
• "CONNECT WITH PC" and "WEBCAM" are displayed in the EVF and LCD monitor.
• Position the Palmcorder so that you are in the picture.
• To confirm if the connection between the Palmcorder and PC is correct, please refer
to "Audio Tuning Wizard" on page 88.
• When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. However, testing by the manufacturer
has confirmed functionality of this Palmcorder with Windows 2000.
Click [Yes] and proceed.
Note
• Do not disconnect the USB Cable while in use.
This could be a source of trouble. For more details, please read the respective Help
file.
• Close the application, then disconnect the USB Cable.
For Windows 98SE/Me users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CONNECT WITH PC" and "WEBCAM" are displayed in the EVF and LCD monitor.
• Position the Palmcorder so that you are in the picture.
• To confirm if the connection between the Palmcorder and PC is correct, please refer
to "Audio Tuning Wizard" on page 88.
Note
• When connecting for the first time using Windows 98SE or Me, the OS installation
CD may be required.
• Do not disconnect the USB Cable while in use.
This could be a source of trouble. For more details, please read the respective Help
file.
• Close the application, then disconnect the USB Cable.
DV203-K.p 81-83.p65 83
Web Camera
83
2003/06/11, 13:31