Table of Contents
Advertisement
Dust Collection
This machine creates substantial amounts
of dust during operation. Breathing air-
borne dust on a regular basis can result in
permanent respiratory illness. Reduce your
risk by wearing a respirator and capturing
the dust with a dust collection system.
Recommended CFM at Dust Port: 100 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust col-
lector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
throughout the system. Explaining how to cal-
culate these variables is beyond the scope of
this manual. Consult an expert or purchase a
good dust collection "how-to" book.
-16-
To connect a dust collection hose:
1.
Fit a 1
⁄
" dust collection hose or shop vacu-
1
2
um hose over the dust port (see Figure 7),
and secure in place with a hose clamp.
2.
Tug hose to make sure it does not come off.
Note: A tight fit is necessary for proper per-
formance.
Dust
Port
Figure 7. Dust port location.
Model T10824 (Mfd. Since 07/14)
Advertisement
Table of Contents
