Adding Rail Tracks; Using Adjustable Stop - Grizzly T10824 Owner's Manual

4. Configure rail adjustment knobs to minimize
play and achieve desired gliding friction (see
Figure 20). When engaged, rail adjustment
knobs can help keep saw from lifting off track.
Figure 20. Location of rail adjustment knobs.

Adding Rail Tracks

Additional rail tracks (Model T10825) can be pur-
chased and joined together for increased cutting
length. To connect multiple tracks, insert connec-
tor into inner grooves of each rail track (see Figure
21). Flip rail tracks over and slide tracks together
so that the connector is equally-distributed. Use a
straight edge to align tracks, then tighten connec-
tor set screws with a hex wrench.
Connector
Figure 21. Joining two rail tracks.
-22-
Rail Adjustment
Knobs
Additional
Rail Track
Using Adjustable
Stop
The adjustable stop included in the Model T27044
Accessory Pack (see Figure 22) attaches to the
rail track and is positioned in front of the saw
body, to provide a stable stopping point. This can
be especially useful when making plunge cuts.
Figure 22. Adjustable stop on rail track.
Model T10824 (Mfd. Since 07/14)
Adjustable Stop