Adjustment Step Of F-14 "Tom Cat - Art-Tech F-14 "TOMCAT" JET Instruction Manual

Radio controlled model aeroplane
Table of Contents

Advertisement

WWW.ART-TECH.COM
18.completed F-14 TOM CAT after assembly.

Adjustment step of F-14 "TOM CAT"

1 .Turn on the transmitter, make sure the throttle is on the
lowest position, connect the flight battery to the ESC then
put it into the battery box.
3. Function of the right knob of the transmitter:turn the
knob and make the main wing reach the min. sweepback,
now by turning the knob you can put the main wing in any
position between the max. and min. sweepback.
5 .Put the aileron trim switch in the middle position, then
make sure the aileron surface on the middle position and
turn correctly, no reverse switch.
2.Make sure the main wing control servo works normally,
move the switch on the right of the transmitter upward,
the main wing was in the max. sweepback, move the
switch on the right of the transmitter downward, the
main wing was in the min.sweepback,
4.Please practice using this function to gain the amount of
sweep you want and become familiar with its operation.
6.Put the rudder trim switch in the middle position, then
make sure the front landing gear on the middle position
and turn correctly.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents