Assembly Of F-14 "Tom Cat - Art-Tech F-14 "TOMCAT" JET Instruction Manual

WWW.ART-TECH.COM

Assembly of F-14 "Tom Cat"

1．Take out the fuselage and main wing, then remove
the cover on the back of the fuselage.
3．Take out two aluminum bolts and four screws
from the accessory bag.
5．Now you need to pop the ball joints into place between
the servo and the wing.
7．Take out two stabilizer and spacing sleeve from the
accessory bag.
2．Strip of the double-sided tape from the wire channel
were the aileron servo wire goes, connect the aileron
servos then press down the cables into the wire channels.
4.Fix the main wing with the long axle bolts and then
fasten the whole assembly with the short screws.
6.Replace the fuselage cover.
7．Fix the stabilizer properly in the fixed beam of the
fuselage, then attach the aluminium spacing sleeve
to the fixed beam and fasten it.
9