Assembly - Art-Tech Diamond 1800 User Manual

Assembly

1. Take off the left/right wing, and the
avigation aluminum pipe.
3. I n s e r t t h e l e f t / r i g h t w i n g i n t o t h e
fuselage.
5. Insert the two nylon bolts into the holes
in the back of the airframe to lock the two
wings with the fuselage.
7. Connect the elevator servo plug (please
don't make it invert), and put the joint into the
vertical wing of the fuselage.
2. Insert the aluminum pipe into the steel
tube of the left or right wing, and make sure
the center position of the aluminum pipe is in
the joint of the two wings.
4. Connect the servo cable at the end of
the left/right wing (please don't make it
invert) and put the joint into the fuselage.
6. Take off the stabilizer and screws in the
accessory pack.
8. Fix the stabilizer in the vertical wing, till
now, the airplane is fully assembled.
5