Installing The Handlebars - Yamaha YZF-R1K Service Manual

HANDLEBARS
EB704704

INSTALLING THE HANDLEBARS

1. Install:
• right handlebar switch 1
NOTE:
Align the projection a on the right han-
dlebar switch with the hole b in the
right handlebar.
2. Install:
• brake master cylinder holder 1
CAUTION:
ACHTUNG:
• Install the brake master cylinder
holder with the "UP" mark facing up.
• First, tighten the upper bolt, then the
lower bolt.
NOTE:
• Align the mating surfaces of the brake
master cylinder holder with the punch
mark a in the right handlebar.
• There should be 2 mm of clearance
between the right handlebar switch
and the brake master cylinder holder.
3. Install:
• throttle grip 1
• throttle cable housing 2
• throttle cables
NOTE:
Align the projection a on the throttle
cable housing with the hole b in the
right handlebar.
4. Install:
• clutch lever holder 1
NOTE:
Align the slit in the clutch lever holder
with the punch mark a in the left han-
dlebar.
7 - 59
CHAS
7