FRONT WHEEL AND BRAKE DISCS
EB700102
REMOVING THE FRONT WHEEL
EB700110
DISASSEMBLING THE FRONT WHEEL
7 - 3
1. Stand the motorcycle on a level surface.
WARNING
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
NOTE:
Place the motorcycle on a suitable stand
so that the front wheel is elevated.
2. Remove:
• left brake caliper
• right brake caliper
NOTE:
Do not squeeze the brake lever when
removing the brake calipers.
3. Elevate:
• front wheel
NOTE:
Place the motorcycle on a suitable stand
so that the front wheel is elevated.
1. Remove:
• oil seals
• wheel bearings
a. Clean the outside of the front wheel
hub.
b. Remove the oil seals 1 with a flat-
head screwdriver.
NOTE:
To prevent damaging the wheel, place a
rag 2 between the screwdriver and the
wheel surface.
c. Remove the wheel bearings with a
general bearing puller.
CHAS
7