Yamaha YZF-R1K Service Manual page 133

CHECKING THE FUSES
3. Replace:
• blown fuse
a. Set the main switch to "OFF".
b. Install a new fuse of the correct
amperage.
c. Set the main switch to "ON" and ver-
ify if the electrical circuit is opera-
tional.
d. If the fuse immediately blows again,
check the electrical circuit.
Item
Main fuse
Headlight
fuse
Signaling
system fuse
Ignition
fuse
Radiator
fan motor
fuse
Backup fuse
(odometer)
WARNING
WARNING
Never use a fuse with an amperage
other than that specified. Improvising or
using a fuse with the wrong amperage
rating may cause extensive damage to
the electrical system, cause the lighting
and ignition systems to malfunction
and could possibly cause a fire.
4. Install:
• rider seat
Refer to "SEATS".
3 - 65
CHK
ADJ
Amperage Q'ty
30 A 1
20 A 1
20 A 1
15 A 1
7.5 A 1
7.5 A 1
3