Assembling The Crankcase - Yamaha YZF-R1K Service Manual

4
CRANKCASE
EB412743

ASSEMBLING THE CRANKCASE

1. Lubricate:
• crankshaft journal bearings
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Apply:
• sealant
(onto the crankcase mating surfaces)
Quick Gasket
ACC-11001-05-01
NOTE:
Do not allow any sealant to come into
contact with the oil gallery or crankshaft
journal bearings. Do not apply sealant to
within 2 ~ 3 mm (0.08 ~ 0.12 in) of the
crankshaft journal bearings.
3. Install:
• dowel pin
4. Install:
• crankshaft journal lower bearings
(into the lower crankcase)
NOTE:
• Align the projections a on the crank-
shaft journal lower bearings with the
notches b in the lower crankcase.
• Install each crankshaft journal lower
bearing in its original place.
5. Set the shift drum assembly and trans-
mission gears in the neutral position.
4 - 62
ENG
®