Yamaha YZF-R1K Service Manual page 334

8
INSTRUMENT FUNCTIONS
When the fuel level indicator light comes on
the odometer display will automatically
change to the fuel reserve trip meter mode
"TRIP F" and start counting the distance
traveled
"SELECT" button to change between the
fuel odometer, trip odometer and odometer
modes in the following order:
"TRIP F" → "TRIP 1" → "TRIP 2" → "ODO"
→ "TRIP F"
To reset a trip odometer to 0.0, select it by
pushing the "SELECT" button and push the
"RESET" button for at least one second. To
reset the fuel reserve trip meter, select it by
pushing the "SELECT" button and push the
"RESET" button for at least one second.
The display will return to "TRIP 1". If you do
not reset the fuel reserve trip meter manu-
ally, it will automatically reset and return to
"TRIP 1" after refueling and the motorcycle
has traveled both 5 km and for approxi-
mately 3 minutes.
Clock
To change the display to the clock mode,
push both the "SELECT" and "RESET" but-
tons.
To set the clock:
1. Push both the "SELECT" and "RESET"
buttons for at least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set the
hours.
3. Push the "SELECT" button to change
the minutes.
4. When the minute digits start flashing,
push the "RESET" button to set the
minutes.
5. Push the "SELECT" button to start the
clock.
NOTE:
After setting the clock, be sure to push
the "SELECT" button before turning the
main switch to "OFF", otherwise the
clock will not be set.
8 - 4
ELEC
from that point.
– +
Push the