Yamaha YZF-R1K Service Manual page 95

CHANGING THE ENGINE OIL
b. Lubricate the O-ring 3 of the new oil
filter cartridge with a thin coat of
engine oil.
CAUTION:
ACHTUNG:
Make sure that the O-ring 3 is posi-
tioned correctly in the groove of the oil
filter cartridge.
c. Tighten the new oil filter cartridge to
specification with an oil filter wrench.
7. Check:
• engine oil drain bolt washer
Damage → Replace.
8. Install:
• engine oil drain bolt
9. Fill:
• crankcase
(with the specified amount of the rec-
ommended engine oil)
10.Install:
• engine oil filler cap
11.Start the engine, warm it up for several
minutes, and then turn it off.
12.Check:
• engine
(for engine oil leaks)
13.Check:
• engine oil level
Refer to "CHECKING THE ENGINE OIL
LEVEL".
14.Install:
• bottom cowling
Refer to "COWLINGS".
3 - 27
CHK
ADJ
Oil filter cartridge
17 Nm (1.7 m • kg, 12 ft • lb)
43 Nm (4.3 m · kg, 31 ft • lb)
Quantity
Total amount
3.6 L (3.2 lmp qt, 3.8 US qt)
Without oil filter cartridge
replacement
2.7 L (2.4 lmp qt, 2.9 US qt)
With oil filter cartridge
replacement
2.9 L (2.6 lmp qt, 3.1 US qt)
3