Chapter 2 - Installation; Package Contents; Required Installation Tools; Video Input - Speco D4CX Operation Instruction Manual

Chapter 2 — Installation

Package Contents

The package contains the following:
 Digital Video Recorder
 Power Adaptor and Power Cord
 Operation Instruction (This Document)
 Speco Central Software CD and Operation Instruction
 Infrared Remote Control

Required Installation Tools

No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up part
of your system.

Video Input

RS232 Port
Power Cord Connector
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Figure 2: 8-Channel DVR rear panel.
Audio In/Out Alarm Input/Output
Network Port Video Out
Connect the coaxial cables from the video sources to the BNC Video In connectors.
Digital Video Recorder
RS485 Port
Factory Reset Switch
3