Speco D4CX Operation Instruction Manual page 61

NOTE: Sequence cannot be used in the 3x3 and 1P7 modes of the 8-channel DVR, and 2x2 mode of the 4-channel
DVR.
You can adjust the display dwell time by highlighting the box beside Interval and pressing the
select dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the
it is On, the DVR will display the camera associated with the event when an event occurs.
Highlight the box beside Resolution and press the
for NTSC video, and 1280x1024, 1440x900 and 1920x1080 (@ 60Hz or 50Hz) for PAL video.
NOTE: When the individual main monitors are connected to the HDMI and VGA connectors for simultaneous
operation, it is recommended to use monitors supported with the same resolution. If monitors unsupported
with the same resolution are connected, video cannot be displayed on the monitor with the resolution
you have set.
Highlight Fit To Screen and press the
the DVR will resize video to fit the main monitor screen.
button. Pressing the
button. You can select from 1280x1024, 1440x900 and 1920x1080
button toggles between On and Off. When it is On,
button. Pressing the
Digital Video Recorder
button. You can
button toggles between On and Off. When
53