Video Loss; Video Blind; Figure 20: Event - Video Loss Setup Screen; Figure 21: Event - Video Blind Setup Screen - Speco D4CX Operation Instruction Manual

Video Loss

Highlighting the box under the Video Loss Interval heading allows you to set the duration of a signal loss before the
DVR will report a Video Loss. The DVR will not consider any signal loss from a camera to be a Video Loss if the
detected signal loss is shorter than the interval set on this screen.
Highlight the box under the Actions and press the
each camera. Each camera can be associated with another camera, trigger an Alarm-Out connector, sound the DVR's
internal buzzer, notify a number of different devices, and/or move PTZ cameras to preset positions.
Highlight Use Ignoring Time and press the
ignore video loss events occurring during the preset period. Highlighting Time Setup and pressing the
you to set up event ignoring time.

Video Blind

Figure 20: Event – Video Loss setup screen.
button. The DVR can be set to react to video loss differently for
button to toggle between On and Off. When set to On, the DVR will
Figure 21: Event – Video Blind setup screen.
Digital Video Recorder
button allows
33