Speco D4CX Operation Instruction Manual page 34

Operation Instruction
The DVR can be configured to run self-diagnostics and report the results.
Highlight the Settings box beside the desired event (System, Check Recording, Check Alarm-In, Disk Almost Full,
Disk Bad, or Disk Temperature), and press the
Highlight the Settings box beside System and press the
to run self-diagnostics on the system. You can select from 1 hr. to 30 days or Never.
Highlight the Settings box beside Check Recording and press the
Highlight the Settings box beside Check Alarm-In and press the
the DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30 days or Never.
Highlight the Settings box beside Disk Almost Full, and press the
at which you want the DVR to trigger an alert. Percentage levels range from 80% to 99%.
Highlight the Settings box beside Disk Bad, and press the
which you want the DVR to trigger an alert. Percentage levels range from 10% to 90%.
Highlight the Settings box beside Disk Temperature, and press the
drive at which you want the DVR to trigger an alert if the temperature exceeds the defined threshold. Refer to the hard
disk drive manufacturer's documentation for the correct temperature setting.
The DVR can be set to react to system events. Highlight the Actions box beside the desired event and press the
button. System events can be associated with an Alarm-Out connector, sound the DVR's internal buzzer, and/or notify
a number of different devices.
NOTE: Alarm-Out action cannot be set to System, Boot Up, Restart, Shutdown and Panic Record events.
Mail notify is the only option available for the System event.
Alert Window notify cannot be set to System, Boot Up, Restart and Shutdown events.
For the Notify action to work, the DVR should be registered in the Speco Central II (Remote Administration
System).
26
button.
button. You can select the interval that you want the DVR
button. The Check Recording screen appears.
Highlighting Schedule On and pressing the
and Off. When set to On, you can select the day, time range and
interval that you want the DVR to run self-diagnostics on the recorder.
The Interval can be selectable from 1 min. to 7 days or Never.
Highlight the + and press the
box allows you to delete a check recording schedule.
button. You can select the interval that you want
button. Select the percentage level of disk usage
button. Select percentage level of bad disk sectors at
button. Select the temperature of hard disk
button toggles On
button to add a schedule item. The