Freewheel Device - Rascal Frontier Owners Manual & Service Record

Controls - Driving Controls/Accelerator
Finger control - To operate, turn on the ignition.
Pull the right hand lever towards you and the machine moves forward
(Fig.2) The more you pull the lever the faster the scooter goes. To brake,
release the lever. Again the faster the lever is released the quicker you will
stop. To reverse, pull the left lever towards you. Do not pull both levers at
once. Note. The controls can be changed for customers with a left-hand
bias. Please contact your local dealer for information.

Freewheel Device

When the vehicle is switched off the brakes are automatically
engaged. This is called "Failsafe Braking". Also, if the batteries are
flat, the brakes are applied. There may be occasions where you may
wish to move the vehicle without power. To do this there is a
Freewheel Device fitted.
The Freewheel device allows the vehicle to be pushed without power.
To activate, first locate the lever (Fig.3). When standing behind the
scooter, it is located on the right hand side of the rear of the vehicle - See Illustration.
• Make sure the ignition is switched off.
• Move the lever UP The vehicle can now be pushed in Freewheel.
• Move the lever DOWN to engage drive. The vehicle is now braked. This is the normal operating position.
• IF YOU ARE NOT COMPLETELY SURE OF THIS FEATURE CONTACT
YOUR DEALER BEFORE OPERATING THE SCOOTER.
Pull the lever UP to enable the vehicle to be moved without power. Braking is disabled. NEVER sit on
the vehicle with the lever in this position. Push the lever DOWN. This is the normal operating position.
The brakes are enabled, and the vehicle can only operate with the lever in this position.
2
3
9